The Calibration Bench is constructed from a 7080 bench and
primary console. The 7081 Secondary Console is an optional
expansion capable of housing additional modules.
The bench consists of frame, back plates, support arms,
and worktop. It is supplied in knockdown format that is
simple to assemble - a separate assembly instruction manual
is provided.
The Primary Console is mounted above the tabletop workspace
and houses calibration modules, DC and AC power supplies,
the central control centre (7051), or custom-built modules.
The console comes fitted with the 7082
mains power control/distribution module and the user can
specify socket type and power requirement. The primary under-console
has switchable lighting and 4 additional sockets, provided
as a standard feature.
The Secondary Console is located under the primary console,
and can house power supplies, pressure calibration modules,
and temperature distribution. It can also house bespoke
design modules such as decade boxes, oscilloscopes, dmm's,
and more. If the secondary console is not required a perforated
back panel is supplied. This can be fitted with tool hooks
and holders for further workspace utilisation.
These consoles are supplied complete, fully tested and
with the modules installed. They are ready to operate and
require only mains power and line pressure to be connected.
The bench assembly is constructed from mild steel throughout.
The side panels and console support arms are welded to provide
a strong frame. The whole assembly paint finished in hardwearing
light grey oven baked paint.
Dimensions |
Overall
(including console) |
Width 200 x height 156 (or 166) x depth 85cm, 175Kg
typical. |
Primary
Console |
Width
200 x height 29 x depth 47cm, 90Kg typical. |
Secondary
Console |
Width
192 x height 40 x depth 19.5 cm, 30Kg typical. |
Height
from worktop |
Primary
Console |
42cm |
Secondary
Console |
12.5cm |
Worktop |
Width
200 x 80 deep x 3.8cm, 85cm above floor, durable finish. |
Supply
Connections |
Electrical –
The Primary console is powered from a single-phase
mains supply via a 16A heavy-duty type IEC socket
at the rear of the console.
The Secondary console is powered from the primary
console via a IEC power link cable.
Pressure - The external
line pressure input ports are arranged on the rear
of the primary and secondary consoles. |