The 7059 features a 4.5 digit display with
5 selectable pressure units.
A pneumatic switch allows direct pressure input, regulator output
or vent control.
Fully integrated with the 7051 Control Centre and EasyCal the
user can define pressure calibration procedures. Fully traceable
calibration certificates can be printed as required.
Specifications |
Range |
Vacuum |
0.2 |
2 |
5 |
10 |
Resolution (bar) |
.001 |
0.01mb |
.0001 |
0.001 |
0.001 |
Regulator |
Yes |
Yes |
Yes |
Yes |
Yes |
Acc % +/- 1 digit |
0.04 |
0.1 |
0.04 |
0.04 |
0.04 |
Temp Stability |
Less than 70 ppm per degC |
Units |
Bar, PSI, kPa, Mpa, inWg, cmWg,
inHg, mmHg, Kg/cm2, atm** |
Maximum Incoming Line Pressure |
Maximum of 17bar (250psi) |
Sensor |
Piezo-resistive – stainless
steel diaphragm |
Over press warning |
1.2 x range full scale –
audio and visual (on LCD) warning |
Fittings/Connections |
Quick Release |
|
** Specify on ordering: 5 pressure
units max |
General Information and Options |
Panel size |
Width 129 x Height 201mm |
Order code |
7059 / Pressure range option code |
Pressure Options |
7100 = 200mbar range.
7101 = 2bar range.
7102 = 5bar range.
7103 = 10bar range. |
|