The 7038 features a 4.5 digit display with
up to 9 selectable Pressure units depending on what pressure
range is chosen,Loop current can also be displayed in mA, or
as a percentage of span (4-20mA).
A min/max logging function (pressure or loop current) is provided.
The min or max values can be recalled to the display and if
required can be viewed in real time.
An additional feature is leak rate display. This allows the
actual leakage rate to be observed in real time in the selected
‘pressure units’ per sec, or per min.
Input connection is standard quick release or minimess high
pressure type.
The 7038 is fully intergratable with the 7051 control centre
and Easycal
The user can define pressure calibration procedures.
Specifications |
Range |
Vacuum |
0.2 |
2 |
5 |
10 |
20 |
35 |
70 |
100 |
200 |
400 |
600 |
Resolution (bar) |
.0001 |
0.01mb |
.0001 |
0.001 |
0.001 |
0.001 |
0.01 |
0.01 |
0.01 |
0.01 |
0.1 |
0.1 |
Acc % +/- 1 digit |
0.04 |
0.1 |
0.04 |
0.04 |
0.04
|
0.04 |
0.04 |
0.04 |
0.04 |
0.1 |
0.1 |
0.1 |
Temp Stability |
Less than 70 ppm per degC |
Units |
Bar, PSI, kPa, Mpa, inWg, cmWg,
inHg, mmHg, Kg/cm2, atm** |
Maximum Pressure |
2 x range. 1.5 x range for 20
bar and above |
Sensor |
Piezo-resistive – stainless
steel diaphragm |
Over press warning |
1.2 x range full scale –
audio and visual (on LCD) warning |
Fittings |
Minimess (> 20 bar) and Quick
Release (< 20 bar) |
|
** Specify on ordering: 5 pressure
units max |
General Information and Options |
Connections |
Quick release coupling for 0.2
to 20 bar ranges.
Minimess coupling for 35 to 600 bar ranges. |
Panel size |
Width 100 x Height 201mm |
Order code |
7038 / Pressure range option
code |
Pressure Options |
7100 = 200mbar range.
|
7101 = 2bar range. |
7102 = 5bar range. |
|
7103 = 10bar range. |
7104 = 20bar range. |
7105 = 35bar range. |
|
7106 = 70bar range. |
7107 = 100bar range. |
7108 = 200bar range. |
|
7109 = 400bar range. |
7110 = 600bar range. |
7111 = Vacuum regulator. |
|
|
|